How To Clean/Dry/Maintain Sex Doll Torso

Sex doll torsos are consumables, but if they are cleaned and maintained correctly, it is possible to use them for a longer period of time. In the long run, it's better to clean sex doll torsos very carefully! Here’s super efficient ways to clean/dry/maintain sex torsos, so that you can enjoy it without too much trouble.

First step: prepare a sex toy cleaner

After using sex , the first thing to do is not to wash it directly, but to prepare the cleaner first.

Why do I have to use a toy cleaner?
Men's semen is actually very difficult to wash off. It can't be washed with water alone and it will be sticky. If you have not ejaculated into the tunnels, then you could wash the inside with water only. So what kind of cleaner is suitable for us to clean?

It is recommended to use a neutral cleaner, such as shower gel, it is best to use a professional sex toy cleaner, try not to use soap, because most of the soap is weakly alkaline, it will still damage the material. Besides alcohol can’t be used to clean the sex doll torso, because ethanol has a certain solubility, which will erode the surface of the tpe, forming pits that are invisible to the eye, then cause bacteria residues.

It is also not good to put the shower gel into the tunnel directly, because most of shower gel are in the form of semi-solid milk. You also know that the inside of the tunnel can be said to be intertwined. If you directly squeeze the shower gel into it, the cleaner is very likely to get stuck in a certain groove, causing bacterial growth, so you must first squeeze the shower gel into an empty container, then add an appropriate amount of water and shake it into bubble water, so that there will be no residue when cleaning the tunnels of sex doll. 

Second step: start cleaning

After the bubble water is made, you can now start to wash tunnels.

How to clean it properly?

Remember that the nails must not be too long before cleaning, it is best to trim them first, otherwise it is easy to scratch the tunnel, causing bacteria to grow in the holes, and remember to wash with cold water as much as possible, otherwise the tpe may dissolve if the water temperature is too high.

Roughly rinse off the semen and lubricating fluid inside first, then pour the bubble water into the inside of tunnel, put your hand in, and scrub every groove in the inner wall with your fingertips. After finishing each corner, you can align the hole with the faucet, pour water into it to wash away the foam, and at the same time stretch your hands in to scrub to make sure that there is no sticky feeling in every corner of the inner wall. The sticky feeling has completely disappeared, otherwise if the detergent, lubricating fluid, or even semen remains in it, it is likely to be smelly and moldy the next time you use it. 

Third step: make your doll dry

Gently open the hole of tunnel, and try to shake out the water inside, then use a clean dry cloth or napkin to dry the outside of the sex doll.

You may want to ask, what should I do if inside is still very wet and cannot be dried in a short time? You need to use professional utensils - absorbent sticks.

Diatomaceous earth is a kind of sedimentary rock formed after the death of diatoms. It is non-toxic and tasteless. It is currently widely used in building materials and kitchen utensils. Because of its strong water absorption, it is also widely used on maturbators/sex dolls for moisture absorption.

Therefore, just insert the diatomite moisture-absorbing stick into the tunnel to the bottom, and press the outside of the tunnel to fully absorb the moisture from every corner of the inner wall (but be careful not to break the moisture-absorbing stick)

After about 3 to 5 minutes, it can be pulled out when it is almost absorbed. Remember not to leave it for too long or even overnight, because if the diatomaceous earth over absorbs the oil of tpe, it may affect its water absorption function.

After pulling it out, you can put the moisture-absorbing stick indoors to let its moisture evaporate automatically, and then it can be reused continuously. 

Four step: follow-up maintenance

After the torso doll is dry, it cannot be put into the drawer directly. It must be placed in a ventilated place indoors for about a few hours to half a day to completely evaporate the water vapor on the surface.

Special attention should be paid to the fact that it is absolutely not allowed to take it to the balcony to dry, because the overheated sunlight will cause sex doll to deteriorate or even dissolve.

After drying, if you want to make the life of the sex doll longer, you must not miss the next step, which is to sprinkle baby powder or cornstarch on the surface of the sex doll to reduce the occurrence of oilness and stickiness.

No need to sprinkle too much or too thick, just spread it evenly with your fingertips to cover the surface of sex doll, and you're done! You can safely put it in a bag and put it in a cool place such as a drawer.